On this page
1. Open the photo in Photopea #
Open Photopea, then choose File → Open and select the picture. The document should appear on the canvas with its layer shown in the Layers panel. The official opening and saving guide covers local files and supported document workflows.
Keep the original photo and give the cutout a different filename when you export. That leaves you a clean starting point if you decide the first selection removed too much.
Choose an image in which the subject is reasonably clear. For a first cutout, a mug on a table or a person against a plain backdrop is easier to judge than transparent glass or a plant against dense foliage. This walkthrough gives you control over the selection; it doesn't invent missing detail in a blurred photograph.
2. Open Magic Cut and inspect the first guess #
Choose Select → Magic Cut. The current editor menu includes that action separately from Remove BG. Magic Cut opens a dialog with the working image on the left and the extracted preview on the right, as shown in Photopea's tutorial.
Look at the preview before adding marks. Decide which part needs correction: an area of the subject that disappeared, some backdrop that remains, or both. For a chair photo, inspect the gaps between the legs as well as the outer outline.
If the initial guesses are badly misplaced, use Clear to reset the marks. Start again with a few deliberate strokes inside obvious subject and background areas. You don't need to paint the whole photograph solid green and red.
3. Mark what should remain and what should disappear #
Use the green marking brush on the subject and the red brush on the background. Adjust Brush Size when the region is narrow. The gray brush erases an incorrect mark. You should see the right-hand preview change as the extraction uses your corrections.
Put green marks inside the subject, away from a confusing edge at first. Put red marks in the backdrop, including any trapped areas between parts of the subject. A broad stroke crossing both areas sends the wrong instruction, so shrink the brush before marking a small gap.
For a product with more than one color, give the tool a few foreground examples across those colors. A dark handle and a pale body both belong to the same mug even when their colors differ. Check that both survive in the preview.
If a correction makes things worse, erase that mark and try a smaller one. Judge the change you just made before adding several more. That makes it easier to identify which instruction confused the extraction.
4. Adjust the edge and accept the cutout #
Use Border to adjust edge softness. A value of 0 makes a hard edge; increasing it makes the transition softer. Compare the preview as you change the value. A crisp manufactured object and fine hair call for different judgments, so there isn't one setting I'd use for every picture.
Inspect the subject's narrow parts before clicking OK. Look for missing stems, a clipped fingertip or leftover background in a hole. The cutout should retain the object you meant to extract, with the unwanted backdrop replaced by transparency.
Photopea's mask documentation explains further control over which parts of a layer remain visible. If you plan to keep editing the composition, inspect the layer and its mask before deciding how to refine it.
5. Save an editable document if you'll return to it #
Choose File → Save as PSD if you need to keep the document's layers and editing structure. This is a separate working file from the PNG you'll use on the website. The PSD should save to your device through the browser's download workflow.
I would save that working version for a banner that may need new text or a changed arrangement. For a single product cutout, you can move straight to the PNG export. The Design & Creative category includes other tools if the next stage is a larger layout.
6. Export the transparent PNG #
Choose File → Export As → PNG, then Save. Use a descriptive name such as ceramic-mug-cutout.png. You should receive a PNG containing the extracted subject and its transparency.
PNG supports a transparent background; JPEG doesn't. Inspect the downloaded file in its intended destination. Some viewers display transparent areas against white or black, so a plain-looking backdrop alone doesn't tell you whether transparency was lost. Place the cutout over a colored background to check the actual result.
For a slide or presentation, see our free presentation tools list. If the outline is still wrong, return to the working document and correct the selection before exporting another copy.
Known problems with selection and edge colors #
Quick Selection behaves oddly when resizing the brush
An April 2025 report described trouble with Quick Selection while using an Alt-click brush gesture. Photopea's developer explained that Quick Selection is another interface to Magic Cut and recommended opening Select → Magic Cut directly. Use that dialog to follow this guide.
Removing a simple background leaves strange artifacts
In an April 2026 two-color image report, the requester confirmed that Color to Alpha solved the removal problem. For a simple color-based image, try Filter → Other → Color to Alpha on the appropriate raster layer and choose the unwanted color. Check the subject carefully because matching colors inside it can also become transparent.
The old color leaves a fringe around a shape
In a May 2026 discussion, Photopea's developer suggested increasing Tolerance when selecting with Magic Wand or using Filter → Other → Color to Alpha. The requester confirmed the correction worked. Use the color-based route when the edge problem comes from one unwanted color, then inspect the subject against the final backdrop.
Troubleshooting the exported cutout #
| Problem | Likely cause | Fix |
|---|---|---|
| Part of the subject disappears | Foreground mark missing or background mark crosses it | Add a smaller green mark or erase the mistaken red mark |
| Background remains between object parts | The gap wasn't marked as background | Add a small red mark inside that gap |
| Edge is too hard or too soft | Border setting doesn't fit the subject | Change Border while inspecting the preview |
| Cutout downloads with a solid backdrop | JPEG export or a visible background layer | Export PNG and check visible layers |
| Viewer shows white around the subject | Viewer backdrop may be white | Put the PNG over a colored layer to inspect transparency |
| Quick Selection gesture interferes | Alternate selection interface | Open Select → Magic Cut directly |
Variations for different kinds of cutout #
Keep several objects together
Mark each intended object as foreground and the gaps between them as background. For a product set, inspect small accessories as well as the largest object. The goal is a single exported composition with all intended parts retained, even if the automatic first guess favors only the biggest one.
Prepare the subject for a layered banner
Save a PSD before finishing the layout, then place your other artwork on separate layers. Photopea's layers guide explains the stacking order. A background below the subject lets you judge the outline in context; hiding that backdrop restores the transparent version for export.
Handle a flat-color graphic
Use the Color to Alpha workaround above when the unwanted backdrop is one color and the subject is a simple graphic. It can preserve partially transparent edges better than erasing everything selected by a broad color match. For an ordinary multicolored photograph, begin with Magic Cut's subject and background instructions instead.
How to remove an image background with Photopea: final checks #
- The preview retains every intended part of the subject.
- Background gaps inside the object are transparent.
- The edge looks right against the intended destination color.
- The working PSD is saved if further editing is planned.
- The website asset is exported as PNG with a descriptive filename.
- The downloaded file has been checked in the destination layout.
Next steps #
Read Photopea vs Pixelcut if you'd prefer a simpler automatic workflow or want to compare processing choices. Our best free background-removal tools list includes installed options. GIMP gives you a desktop editing route, while Photoroom focuses on product-photo presentation.
Featured illustration: WebIndexly, created with OpenAI image generation.




