On this page
1. Prepare a short recording #
Download ScreenToGif from its official releases. The application requires .NET 9 Desktop Runtime or newer, as listed in its repository. Version 2.43.2 is the current release checked for this guide.
Choose a single action before opening the recorder. For example, show a visitor opening a filter menu and selecting one item. Start with the browser already on the right page. Move unrelated windows and private information out of the capture area.
You should have the action ready to perform without searching through several pages. That preparation matters more than choosing a high frame rate. A clear short sequence is easier to edit and easier for someone else to follow.
2. Open the recorder and frame the action #
Open Recorder. The official recording guide describes the capture rectangle, FPS, Width and Height controls. Drag the rectangle's edges or enter dimensions so the area includes the menu and its result.
Set FPS to a modest starting value, such as 10, for a brief interface demo. This is a suggested starting setting, and you can change it if the movement needs more detail. Don't include a large empty portion of the desktop just because it is there.
The framed region should contain everything the reader needs to see. Leave enough room for a popup that extends beyond its button. If the menu will open outside the rectangle, fix the framing before recording.
3. Record the action and stop #
Click Record, perform the action, then click Stop. Pause can interrupt an active recording, but stopping is what opens the recorded frames in the editor. You should see a preview with a strip of frames underneath it.
Begin with a brief still moment before the click. End once the result is visible. For a filter, that might mean showing the selected label and the changed content. You don't need to record yourself finding the page again.
If the capture missed the menu or showed the wrong option, another short recording is often simpler than trying to repair the meaning in the editor. Editing is good for timing; it can't turn the wrong choice into the right one.
4. Inspect the sequence before cutting #
Use the editor's playback controls to watch the recording. The editor documentation describes the frame list, viewer and right-hand action panels. Select a frame to inspect the moment shown in the preview.
Find the first frame that helps explain the action and the last frame that shows its result. Look for a pause where nothing happens, a stray pointer movement or a popup that appeared too briefly.
Watch once before making cuts so you understand the sequence. A pause after the result can help the reader; a pause while you're searching for the control usually doesn't. Keep the frames that make the action understandable.
5. Delete unwanted frames and replay #
Select the unwanted frames in the strip and use Edit → Delete, or press Delete. Use Home → Undo if you remove something you need. The official ribbon reference documents these actions and the playback controls.
Replay the shorter version. The action should still have a visible beginning, the click and an understandable result. Check the join where you removed frames; a sudden jump can make the sequence confusing.
Keep the edit focused. If you find yourself deleting most of the capture, record a cleaner version. You'll spend less time locating the right frame, and the final sequence will have fewer abrupt jumps.
6. Save the animation and the editable project #
Choose File → Save as, or press Ctrl+S. In the right panel, choose GIF as the output type, select the folder and filename, then click Save. For a basic first export, use a built-in GIF encoder instead of adding an optional external encoder.
The export instructions also explain project output. Save a ScreenToGif project separately when you expect to revise the sequence. A filename such as filter-menu-demo.gif makes the finished file easy to identify.
You should see the completed output in your chosen folder. The project is for later editing; use the GIF for the attachment or webpage. Don't send a project file to someone expecting an animated image.
7. Check the saved GIF where you'll share it #
Open the exported file in a browser or viewer that plays animation. Watch the complete loop, then check it at the size you'll use on the page. Read the menu labels and confirm the ending doesn't disappear immediately.
Look through the frames for private information. Check the file against the destination's stated upload allowance. If the animation is too large, shorten the sequence or record a smaller area before adding another complicated export step.
The saved GIF should explain the same action as the editor preview. If the destination changes its appearance or doesn't animate it, confirm that it accepts animated GIF attachments. A static image preview doesn't always tell you what the downloaded file contains.
Known problems and the fixes people reported #
An optional encoder download fails
A July 2026 installation report describes an FFmpeg download returning an error and an invalid ZIP. Replies describe downloading through Extras in the settings and checking the plugin's file path. For a straightforward GIF, a built-in encoder avoids that optional dependency. Don't keep repeating an installation that has already failed with the same download.
FFmpeg export fails after an update
In a May 2026 issue, users reported clearing old FFmpeg and Gifski paths and using Download in Configuration → Extras. Version 2.43.2's release notes include fixes for FFmpeg 7 and newer. Update the application and check the configured encoder path if you're using FFmpeg.
Troubleshooting table #
| Problem | Likely cause | What to do |
|---|---|---|
| The opened menu is cut off | Capture area excludes the popup | Reframe before a new recording |
| The action starts after a long wait | Extra leading frames | Delete that wait and replay the join |
| The result disappears too quickly | Ending has too little visible time | Preserve more ending frames in a new capture |
| FFmpeg won't download | Failed optional download | Use a built-in GIF encoder or check Extras |
| Export uses a missing encoder path | Old plugin configuration | Check Configuration → Extras and download/path settings |
| The recipient can't use the attachment | Project sent instead of GIF | Send the exported .gif file |
Variations for clips and frame sequences #
Turn an existing clip into the project
Use File → Load to open supported media in the editor, as documented in the ribbon reference. Review the imported frames before editing. If your only job is converting an existing clip, Ezgif is another option without the desktop editing workflow.
Save the individual frames
The export panel supports image-frame output. Select the frames you need; Ctrl+A selects all of them. This is handy when the help page needs a still image beside the animation. GIMP can handle further pixel editing of a selected frame.
Make a different capture on Windows
If you already maintain a screenshot workflow in ShareX, its GIF recording feature may fit that routine. Stay with ScreenToGif when frame editing is the reason for choosing it. The GIF tool list covers the browser and Mac alternatives, too.
How to create a GIF with ScreenToGif: final checks #
- The animation shows one identifiable action and its result.
- The first and last frames make the loop understandable.
- The menu labels remain readable at the intended display size.
- The exported GIF opens and plays outside the editor.
- Private content is absent from the captured frames.
- An editable project is saved when revisions are likely.
Next steps #
Read ScreenToGif vs Ezgif if you're deciding between recording and converting existing media. For a designed sequence with captions and graphics, Canva offers a different starting point. Choose the workflow before spending time on encoder settings.
Featured illustration: WebIndexly, created with OpenAI image generation.



